Panasonic TH-43DX400K, Service Manual

Page: 11 / 52

TH-43DX400K/TH-43DX400S/TH-43DX400T
11
5.1.3. Audio Mutuality
• No adjust.
5.1.4. Non-Linear
• No adjust Press OK button to choose a backlight, volume, brightness,contrast, saturation,sharpness,hue and so on, press ◄ / ►
buttons to nonlinear adjustment.
5.1.5. VIF Initialization
• No adjust.
5.1.6. System Setting
No Item Description
1 Brightness Adjust the Brightness Curve.
2 Contrast Adjust the Contrast Curve.
3 Saturation Adjust the Saturation Curve.
4 Hue Adjust the Hue Curve.
5 Sharpness Adjust the Sharpness Curve.
6 Volume Adjust the Volume Curve.
7 Backlight Adjust the Backlight Curve.
No Item Description
1 HOTKEY
Press ◄ / ► button to switch factory hotkey on or off. For shipping
condition, this item should be off.
2 AGING MODE
Press ◄ / ► button to switch aging mode on or off. When aging mode is
on, press EXIT button to exit this mode.
3 Default Country No adjust.
4 POWER ON MODE
Press ◄ / ► button to switch AC power on status. Memory is power on
memorized, Seconda is power on standby, Direct On is power on
always.
5 Country Setup No adjust.
6 PQ FILE...update No adjust.
7 HDCP Key Update No adjust.
8 CI Plus Key Update No adjust.
9 IP Enable Mapping No adjust.
10 Mac Addr Update No adjust.
11 3D No adjust.
12 Linux TimeSource No adjust.
13 Channels No adjust.
14 SKY factory channel preset No adjust.
15 Burn MAC Press OK button from U disk write MAC.
16 Burn HDCP KEY Press OK button from U disk write HDCP KEY.
17 Burn WIDI KEY Press OK button from U disk write WIDI KEY.
18 Burn CI KEY Press OK button from U disk write CI KEY.
19 Burn ALL(MAC HDCPKEY WDID CI
KEY) Press OK button from U disk write MAC ,HDCPKEY, WDID and CI
KEY.