manualshive.com logo in svg

Panasonic TH-43CQE1W, Operating Instructions Manual, Page: 35 / 61

Share
Download
Panasonic TH-43CQE1W Operating Instructions Manual Download Page 35

English

   - 34 -

● Video equipment and HDMI cable shown are not supplied with this unit.
● Connect the equipment complying with the HDMI standard.
● Some HDMI equipment may not be able to display picture.
● This Display does not support VIERA LINK.
● Use an HDMI High Speed cable complying with the HDMI standards.

Note: When inputting 4K video signals exceeding the transmission speed supported by an HDMI High Speed 

cable, use an HDMI cable supporting 18 Gbps high-speed transmission such as the one certified as a Premium 

HDMI cable. When inputting video signals exceeding the transmission speed supported by the HDMI cable 

you are using, malfunction may occur such as interrupted pictures and no display on the screen.

USB Auto Play

Using this option you can set your Display to start playing the media content installed 

on a removable device automatically. Refer to 

USB Auto Play Feature

 section for 

detailed information.

Software Licenses

Display the software license.

Adapter Name

Connection device name setting.
Note: Available with Wireless Display input.

Summary of Contents for TH-43CQE1W






























































Reviews:

No comments