55
English
Symptoms
Check
The image from the HDMI input is
abnormal.
Check the HDMI cable support 4K, and whether compliant of HDMI
standard.
Check the input signal compatible with this TV. (see page 52 - 53)
To set [EDID select] to [4K/30p] when the connected device does not
support 4K.
The image from PC input is abnormal.
Check the PC setting correct.
Check the input signal compatible with this TV. (see page 52 - 53)
The Serial commands is
uncontrollable.
Check that [SERIAL IN/LAN select] is selected [SERIAL IN]. (see page 36)
Check whether the connection has been made properly.
(see page 20)
The LAN is uncontrollable.
Check that [SERIAL IN/LAN select] is selected [LAN]. (see page 36)
Check that the connection has been made properly.
(see page 43)
Check that [LAN setup] is set properly.
(see page 36)
Check that [PJLink] is set to [On]. To set it to [On], the [PJLInk
Password(Web)] setting is required. (see page 37)
The unit is not turned on even if the
power ON command is sent with the
LAN control.
If the [Power save mode] is set to [Enable], set it to [Disable]. (see page 38)
LCD TV panel
Symptoms
Check
It takes a while for the picture to
appear.
The unit digitally processes the various signals in order to reproduce
esthetically pleasing images. As such, it sometimes takes a few moments
for the picture to appear when the power has been turned on, when the
input has been switched.
The edges of the images flicker.
Due to the characteristics of the system used to drive the liquid crystal
panel, the edges may appear to flicker in the fast-moving parts of the
images: This is normal and not indicative of malfunctioning.
There may be always-lighting dots
or non-lighting dots appear on the
screen.
This is a characteristic of liquid crystal panels and is not a problem.
Image retention may occur. If you display a still picture for an extended
period, the image might remain on the screen. However, it will disappear
when a general moving picture is displayed for a while. This is not
considered as malfunction.
Image retention appears
This TV uses special image processing. Hence a slight time lag may occur between image and audio, depending on
the type of input signal. However, this is not a malfunction.
