Panasonic TH-42SF1HU, Operating Instructions Manual

Page: 54 / 105

English
54
Date and time
Set date and time. ([- -] shows no programme is set.)
[Date and time] - submenu screen
Date and time
Set
FRIDAY 10:00 2016/01/01
Year 2016
Month
Day
Hour
Minute 1
1
10
0
■
Set date and time
Select [Year / Month / Day / Hour / Minute].
Set the selected item.
Date and time
Set
FRIDAY 10:00 2016/01/01
Year 2016
Month
Day
Hour
Minute 1
1
10
0
Select [Set] and press <ENTER>.
Date and time
Set
FRIDAY 18:00 2016/02/05
Year 2016
Month
Day
Hour
Minute 2
5
18
0
Note
● If the present date and time are not set, the time
settings for [Set up timer], [Screensaver], etc. cannot
be made.
● The present date and time setting is reset in the
following case.
When the main unit is left unattended for 7 days or
longer after the <Main Power On / Off button> is
turned OFF, the power plug is removed, or power
failure has occurred, etc.
●
Date and time cannot be set when [Year / Month /
Day / Hour / Minute] are set to [- -].
Network settings
Set when networking with a computer.
[Network settings] submenu will be displayed.
Network settings
Serial control
SF1H-00
Auto
Off
SERIAL IN
Off
Off
Display name
DIGITAL LINK mode
DIGITAL LINK status
DIGITAL LINK menu
Network status
LAN setup
AMX D. D.
Extron XTP
Crestron Connected™
Reset
Off Network control
■
[Serial control]
Selects the RS232-C control terminal.
[SERIAL IN]:
Controls using the SERIAL IN terminal of the
display.
[DIGITAL LINK]:
Controls via the optional device that supports
DIGITAL LINK output (ET-YFB100G, ET-
YFB200G) and the DIGITAL LINK / LAN terminal.
■
[Network control]
Set when controlling with the unit’s LAN terminal.
[On]:
Controls via LAN using the LAN terminal of the
Display. The power indicator lights orange when
the power is turned off with the remote control
(standby).
[Off]:
Invalidates control with LAN terminal.
(In this case, the power consumption of Standby
condition (when the power is turned off with the
remote control) will be slightly reduced.)
Note
●
When using the LAN control function for “Using
Network Function” (see page 70 - 76), set this
function to [On]. Even if [Off] is selected, the HDMI
communication via a twisted pair cable transmitter
is possible while the power is on.
■
[Display name]
The name of the Display that is shown on the network
can be changed.