background image

46

Panasonic Professional Display 
Company, Unit of Panasonic Corporation of 
North America 
One Panasonic Way 2A-4
Secaucus, NJ  07094

Panasonic Puerto Rico, Inc. 
Ave. 65de Infanteria, Km.9.5
San Gabriel Industrial Park
Carolina, Puerto Rico 00985

PANASONIC PLASMA SCREEN

Limited Warranty

 

 
 

Models or Parts

Part

Warranty

Labor

Warranty

Plasma Screen

1 Year

1 Year

Carry-in or mail-in service in 

Puerto Rico

 can be 

obtained during the warranty period by 

787-750-5135

This warranty is extended only to the original purchaser 
and is non transferable.  A purchase receipt or other 
proof of date of original purchase will be required before 
warranty service is rendered.

This warranty only covers failures due to defects in 
materials or workmanship, which occur during normal 
use.  The warranty does not cover damage which occur 
in shipment, or failures which are caused by products 
not supplied by the warrantor, or failures which result 
installation, set-up adjustments, improper antenna,

inadequate signal pickup, maladjustment of consumer 
controls, improper operation, power line surge, improper 
voltage supply, lighting damage, or service by anyone 
other than an authorized repair facility, or damaged this 
attributable to acts of God.

LIMITS AND EXCLUSIONS

There are no express warranties except as listed above.

THE WARRANTOR SHALL NOT BE LIABLE FOR 
INCIDENTAL OR CONSEQUENTIAL DAMAGES 
(INCLUDING, WITHOUT LIMITION, DAMAGE 
TO DISCS) RESULTING FROM THE USE OF THIS 
PRODUCT, OR ARISING OUT OF ANY BREACH OF 
THE WARRANTY.  ALL EXPRESS AND IMPLIED 
WARRANTIES, INCLUDING THE WARRANTIES 
OF MERCHANTABILITY AND FITNESS FOR 
PARTICULAR PURPOSE, ARE LIMITED TO THE 
APPLICABLE WARRANTY PERIOD SET FORTH 
ABOVE.

Some states do not allow the exclusion or limitation 
of incidental or consequential damages, or limitations 
on how long an implied warranty lasts, so the above 
exclusions or limitations may nor apply to you. This 
warranty gives you specific legal rights and you may 
other rights, which vary from state to state.

If you have a problem with this product that is not 
handled to your satisfaction, then write the Consumer 
Affairs Department at the Company address indicated 
above.

In the USA

FOR THE NEAREST SERVICE CENTER

1-888-972-6276

 

50 Meadowland Parkway
Panazip #1F-10
Secaucus, NJ  07094

In Puerto Rico

For service call 787-750-5135

Panasonic Professional Display Company or Panasonic 
Puerto Rico, Inc. (collectively referred to as “the Warran-
tor”) will repair this product and all included accessories 
with new or refurbished parts, free of charge in the USA 
or Puerto Rico, of the original purchase in the event of a 
defect in materials or workmanship as follow:

Carry-in or mail-in service in the 

USA

 may be obtained 

during the warranty period by contacting Panasonic 
Professional Display Company Factory Servicenter listed 
in the Service Directory or call toll free 

1-888-972-6276

 

to locate an authorized Servicenter.

Summary of Contents for TH-42PR10U

















































Reviews: