Screensaver
Start
Mode
Finish Time
Start Time
Time Designation
6 : 15
12 : 30
PRESENT TIME MON 15 : 00
Screensaver
Start
Mode
Operating Time
Periodic Time
Interval
12 : 00
3 : 00
PRESENT TIME MON 15 : 00
Screensaver
Start
Mode
Screensaver duration
Standby after SCR Saver
6 : 15
PRESENT TIME MON 15 : 00
2
1
3
1/2
Signal
Input label
Wobbling
Setup
Power management
Off
Off
Standby save
On
ECO
Off
OSD Language
English(UK)
Component/RGB-in select
RGB
Screensaver
No activity power off
No signal power off
Disable
Enable
Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of sharper contour
of image.
Press to display the Setup menu.
Press to select “Wobbling”.
Press to select “On” or “Off”.
On:
Shifts the position of the display image on a
fi
xed
time
interval
.
Press to exit from adjust mode.
Notes:
• If “MULTI DISPLAY Setup” is set to “On”, this function does not operate.
• When this function is operating, part of the screen may appear to be missing.
Wobbling
30
After selecting Time Designation, Interval or Standby after SCR Saver, the relevant Time Setup will become available
for selection and the Operating Time may be set. (Time cannot be set when “Mode” is “On” or “Off”.)
Press to select Start Time / Finish Time
(When Time Designation is selected).
Press to select Periodic Time / Operating Time
(When Interval is selected).
Press to select Screensaver duration
(When Standby after SCR Saver is selected).
Press to setup.
button: Forward
button: Back
Note:
Timer function will not work unless “PRESENT TIME” is set.
Notes:
• Pressing “ ” or “ ” button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is selected.]
• Pressing “ ” or “ ” button continuously changes the Time by 15 minutes.
• “Screensaver duration” of the “Standby after SCR Saver” can be set from 0:00 to
23:59. When this is set to “0:00”, “ Standby after SCR Saver” will not be activated.
Screensaver (For preventing image retention)
Setup of Screensaver Time
