Panasonic TH-42BT300U, Operating Instructions Manual

Page: 63 / 76

63
Display of the FUNCTION button guide
Pressing the FUNCTION button can display the FUNCTION button guide to refer for the function of each button.
Assigning functions to the FUNCTION button on the remote control enables a user to switch
between show/hide and modes with just a single touch of a button. The function settings are
con gured by using “FUNCTION BUTTON SETTINGS” in the SETUP menu (see page 56).
The button functions are configured in two ways depending on the setting (On/Off) of “Studio
mode” in the OPTIONS menu. Similarly, factory default settings vary as follows.
Using FUNCTION button
Studio mode: On Studio mode: Off
FUNCTION Button 1
FUNCTION Button 2
FUNCTION Button 3
FUNCTION Button 4
FUNCTION Button 5
FUNCTION Button 6
FUNCTION Button 7
FUNCTION Button 8
WAVEFORM MONITOR
MARKER SETTINGS
HV DELAY
BLUE ONLY
3D SETTINGS
SIGNAL
COLOR GAMUT
SCROLLING BAR OFF TIMER
EXTERNAL SCALER MODE
TEST PATTERNS
BLUE ONLY
3D SETTINGS
SIGNAL
COLOR GAMUT
SCROLLING BAR
If the guide display is not needed, set “FUNCTION BUTTON GUIDE” in “FUNCTION BUTTON SETTINGS” to “OFF” (see page 56).
The operation starts.
FUNCTION
1:WAVEFORM MONITOR 2:MARKER SETTINGS 3:HV DELAY 4:BLUE ONLY
6:SIGNAL 7:COLOR GAMUT 8:SCROLLING BAR 5:3D SETTINGS
3D SETTINGS / SIGNAL / COLOUR GAMUT
Menu is displayed.
(Example: 3D SETTINGS)
ON 3D FUNCTION
AUTO 3D INPUT FORMAT
3D
3D VIEWING MODE
NORMAL LEFT/RIGHT SWAP
ON 3D COLOR COMPENSATION
3D SETTINGS
SAFETY PRECAUTIONS
Pressing the FUNCTION button clears the menu.
SCROLLING BAR / TEST PATTERNS
Con rmation screen (Example: SCROLLING BAR)
YES N O
FUNCTION
SCROLLING BAR
• SCROLLING BAR
Activates the SCROLLING BAR ONLY screensaver.
After 15 minutes, the display enters standby mode.
Press to
select
“YES”.
Press.
The operation starts.
• TEST PATTERNS
Each time you press , a different test pattern is displayed
(seven in all).
Color Bars Red Green
Blue
Frame
(2 lines × 2 dots) Black 1% window
To exit this mode, press any button other than .
To exit this mode, press any button.
Note:
PC POWER MANAGEMENT, DVI-D POWER MANAGEMENT and NO SIGNAL POWER OFF are deactivated during
SCROLLING BAR or TEST PATTERNS operation. (see page 42)
Factory default settings