Self-Check Function
1. Checks the communication IIC bus lines
2. Provides a SOS History
To Access the Self-Check Mode, turn the TV on and while pressing
“VOLUME ( - )” button on the main unit, press the “OK” button on the
remote control for more than 3 seconds.
To Access the Self-Check Mode
, turn the TV on and while pressing
“VOLUME ( - )” button on the main unit, press the “OK” button on the
remote control for more than 3 seconds.
To Exit the Self-Check Mode, Press and hold the Power button on
the TV for 5 seconds or disconnect the AC cord from the wall outlet.
To Exit the Self-Check Mode
, Press and hold the Power button on
the TV for 5 seconds or disconnect the AC cord from the wall outlet.
TV volume down & OK on remote only does a basic IC self check. It does NOT
restore the unit to factory shipping settings.
It does not clear channel programmed settings, picture settings, channel labels, LOCK
mode settings, or password.
Using this method, it shows the unit’s firmware version (Peaks 1.050 and GenX
1.00) and it checks IIC communications ONLY.
This is more useful to identify the firmware version without having to decode the info in
the setup menu “About/Version” screen.
88
Summary of Contents for TH-37PX60U
