Panasonic TH-37PWD8BK, Service Manual

Page: 16 / 173

7.18. Removal of stand brackets
1. Remove the plasma panel section from the servicing stand
and lay on a table (covered), with the plasma panel surface
facing downward.
Spread a soft cloth for protection, to prevent panel surface
from scratching.
2. Remove the stand bracket (left, right) fastening screws (×4
each) and remove the stand brackets (left, right).
7.19. Replacement of the plasma
panel
1. Place the new plasma panel (finished) on the flat surface of
the table (covered by a soft cloth), with the plasma panel
surface facing downward.
2. Fit the stand brackets (left, right.) fasten 4 screws each on
the new plasma panel.
3. Place the plasma panel section on the servicing stand.
4. Attach the front frame, each P.C.Board and so on, to the
new plasma panel.
* When fitting the front frame, be careful not to allow any
debris, dust or handling residues to remain between the
front glass and plasma panel.
16
TH-37PWD8BK