background image

42

Teletext operation 

(Analogue mode only)

• Teletext features may vary depending on the Broadcasting Companies and is only available if the channel selected

is transmitting Teletext.

• Pressing the 

MENU

 button whilst in Teletext operation will display the contrast function with a cyan bar, press 

 to

alter the setting as required.

• Pressing the 

MENU

 button whilst in Teletext operation will display special function options at the bottom of the

screen.

• Pressing the 

Volume up / down

 button whilst in Teletext operation will display the volume function with a green bar,

press  

 to alter the setting as required.

What is List mode ?

In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these numbers
can be altered and stored in the TV’s memory.

What is FASTEXT mode?

In FASTEXT mode, four differently coloured subjects are situated at the bottom of the display. To access more information
about one of these subjects, press the appropriately coloured button. This facility enables fast access to information
on the subjects shown.

Note:

If Teletext is in use, the aspect ratio is set to 16:9.

TV / Teletext mode

Press the 

TV/TEXT

 button to switch between the current programme.

Page Selection

Pages can be selected in two ways :
a. Press the Up / Down buttons to increase or decrease the page number by one.
b. By entering the page number, using 0 - 9 on the remote control.

Full / Top / Bottom

Press the 

MENU

 button to display special functions, followed by the 

Green

 button.

Press the 

Green

 button again to expand the BOTTOM half.

Press again to return to normal (FULL) size.

Reveal

Press the 

MENU

 button to display special functions, followed by the 

Red 

button to reveal

hidden words e.g. quiz page answers. Press again to hide.

Red / Green / Yellow / Blue buttons

In FASTEXT mode they correspond to the differently coloured subjects.
In List mode they correspond to the differently coloured page numbers.

List Store

In List mode the four page numbers can be altered (programme positions 1 - 25 only).
To do this, press one of the four coloured buttons and enter the new page number.
Press and hold the 

OK 

button, the page numbers will change to white indicating that the

page is stored.

HOLD

To hold the Teletext page when viewing multi-page information.
Press again to return to automatic page update.

Favourite Page (F.P.)

Stores a favourite page in memory for instant recall. To store such a page, the TV must be
in List mode, and the programme position must be from 1 - 25.
Press the 

Blue

 button, select the page number, then press and hold the 

OK

 button. The

page number is now stored.
Press 

STTL

 to recall this page.

TV/TEXT

HOLD

VCR

1

2

3

4

5

6

7

8

9

0

Green

MENU

Red

MENU

VCR

1

2

3

4

5

6

7

8

9

0

OK

Blue

STTL

VCR

1

2

3

4

5

6

7

8

9

0

OK

Summary of Contents for TH-37PE30





















































Reviews: