5
b
a
Setting Up the TV
Attaching the pedestal
1
Assemble the pedestal
1
Lay the TV on a foam mat or thick soft cloth on a
table.
2
Remove the assembly screws from the TV.
Inserting remote’s batteries
Please contact your local Panasonic dealer to purchase the
recommended wall-hanging bracket.
Rear of the TV
of
(View from the side)
Wall mounting the TV (optional)
■
Holes for wall-hanging bracket installation
■
Model
a
b
Model
Type
Depth of screw
Minimum Maximum
●
When optional accessories such as wall brackets etc.
are used, always read and follow the manufacturer
installation and usage instructions.
●
Do not mount the unit directly below ceiling lights
(such as spotlights or halogen lights) which typically
give off high heat. Doing so may warp or damage
plastic cabinet parts.
●
When installing wall brackets you must ensure the
wall bracket is not electrically grounded to metal wall
studs. Always ensure that there are no electrical
cables, pipes etc. in the wall before you begin the
wall bracket installation.
●
To prevent fall and injury, remove the TV from its
fixed wall position when it is no longer in use.
Warning
Depth
screw
Screw for fixing the TV onto the
wall-hanging bracket (not supplied)
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking the
TV.
Removing the pedestal from the TV
32-inch 100 mm 100 mm
40-inch 200 mm 100 mm
43-inch 200 mm 100 mm
32-inch M4 8 mm 9 mm
40-inch M6 10 mm 12 mm
43-inch M6 10 mm 12 mm
Preparation
Note the correct
polarity (+ or -)
push down
the cover
Illustrations shown may be different between models
and countries.
Note
Assembly screws
(ST4 x 20) x 4
●
inch model
43-
Base
