11.1.1. Display Indication
1. Self-check is used to automatically check the bus line
controlled circuit of the LCD display.
2. To get into the Self-check mode, press the
volume down
button on the customer controls at the front of the set, at the
same time pressing the
OFF-TIMER
button on the remote
control, and the screen will show :-
If the CCU ports have been checked and found to be
incorrect
Or not located then " - - " will appear in place of " OK "
3. If you want to exit this mode, press stand by button on the
remote control or press the Main Power on/off switch at the
front of the set.
11 Trouble shooting guide
11.1. Self Check
11.1.2. Power LED Blinking timing chart
1. Subject
Information of LED Blinking timing chart.
2. Contents
When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the
defective block can be identified by the number of blinkes of the Power LED on the front panel of the unit.
3. Remarks
Above Fan function is operated during the fans are installed.
33
TH-32LHD7UY / TH-32LHD7UXK / TH-32LHD7UXS / TH-32LHD7EK / TH-32LHD7ES / TH-32LHD7BK / TH-32LHD7BS
Summary of Contents for TH-32LHD7BK
Page 30: ...30 TH 32LHD7UY TH 32LHD7UXK TH 32LHD7UXS TH 32LHD7EK TH 32LHD7ES TH 32LHD7BK TH 32LHD7BS ...
Page 31: ...31 TH 32LHD7UY TH 32LHD7UXK TH 32LHD7UXS TH 32LHD7EK TH 32LHD7ES TH 32LHD7BK TH 32LHD7BS ...
Page 32: ...32 TH 32LHD7UY TH 32LHD7UXK TH 32LHD7UXS TH 32LHD7EK TH 32LHD7ES TH 32LHD7BK TH 32LHD7BS ...
Page 76: ...TH 32LHD7UY TH 32LHD7UXK TH 32LHD7UXS TH 32LHD7EK TH 32LHD7ES TH 32LHD7BK TH 32LHD7BS 76 ...
