English
7
Installing the wall-
hanging bracket
■
When using the wall-hanging bracket
Choosing to wall mount the TV shall be done at the
owner’s risk. Always use a qualified installer to perform
a TV wall bracket installation. Incorrect fitting may cause
equipment to fall, resulting in injury and product damage.
Any such damage will void your warranty.
●
Holes for wall-hanging bracket installation
Rear of the TV
a
b
a: 200 mm
b: 200 mm
(View from the side)
Depth of screw
minimum: 9 mm
maximum: 14 mm
Type of screw: M4
Screw for fixing the TV onto the
wall-hanging bracket (not supplied with
the TV)
Warning
●
Using other wall-hanging brackets, or installing a wall-
hanging bracket by yourself have the risk of personal
injury and product damage. In order to maintain the
unit’s performance and safety, be absolutely sure to
ask your dealer or a licensed contractor to secure
the wall-hanging brackets. Any damage caused by
installing without a qualified installer will void your
warranty.
●
Carefully read the instructions accompanying optional
accessories, and be absolutely sure to take steps to
prevent the TV from falling off.
●
Handle the TV carefully during installation since
subjecting it to impact or other forces may cause
product damage.
●
Take care when fixing wall brackets to the wall.
Always ensure that there are no electrical cables or
pipes in the wall before hanging bracket.
●
To prevent fall and injury, remove the TV from its fixed
wall position when it is no longer in use.
Front
B
2
Correct
Wrong
Top
View
Front (Display)
Front (Display)
Side
View
Front
(Display)
Front
(Display)
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking the
TV.
1
Lay the TV on a foam mat or thick soft cloth on a
table.
2
Remove the assembly screws from the TV.
3
Pull out the pedestal from the TV.
4
Remove the assembly screws from the bracket
TH-32FS500AZ_Eng.indb 7
TH-32FS500AZ_Eng.indb 7
3/5/2018 3:09:43 PM
3/5/2018 3:09:43 PM
