English
28
Volume Adjustment
Press <VOL +> <VOL -> or <+ (Unit)> <- (Unit)> to
adjust volume.
INPUT
ENTER
MENU
+
-
Unit
20
Volume (SPEAKERS)
●
The current sound volume level is memorised even if
the power is turned off.
●
When [Maximum VOL level] is set to [On], the volume
can only be adjusted to the maximum point you set,
and the displayed value turns red when it reached its
maximum. (see page 56)
●
When [Initial VOL level] is set to [On], the volume will
be at the set level when the display is turned on. (see
page 56)
Sound mute On / Off
It is useful when you want to mute the sound temporarily,
for example, when answering the phone or door.
Press <MUTE>.
●
appears on the screen and the sound is muted.
Press again to reactivate the sound.
●
It is also reactivated when the power is turned on / off
or the volume level is changed.
●
While MUTE is active, is displayed as a reminder
after operation.
●
In [ENGLISH(US)] OSD language, is displayed as
[MUTE].
RECALL
It is possible to check the setting status of input label,
picture mode, etc.
Press <RECALL>.
Current setting status will be displayed.
10:00
1
2
3
4
5
PC
16:9
Memory name: MEMORY2
Off timer
90 min
1
Input label
2
Aspect mode (see page 30)
3
Profile name (see page 41)
4
Off timer remaining time (see page 29)
5
Clock / Mute (see page 28, 59)
●
The followings are displayed for about 30 seconds at
the end: [No signal] - when there is no video signal to
the selected input, [No external media] - when a USB
memory is not connected to the USB terminal at the
time of using the USB input.
●
To display the clock, set [Date and time] and then set
[Clock display] to [On]. (see page 50, 59)