manualshive.com logo in svg

Panasonic TH-103VX200C, Operating Instructions Manual

Share
Download
Panasonic TH-103VX200C Operating Instructions Manual Download Page 51

47

Screensaver

Setup menu

Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a Screensaver should be used.

Screensaver

Negative image

Start

Function

External scaler mode

Power save

PC Power management

Auto power off

Off

Off

Off

Off

OSD design

Type1

OSD position

Upper left

OSD Language

English (UK)

Signal

Extended life settings

Screensaver

Network Setup

Input label

Component/RGB-in select

RGB

3D Settings

 

1

Function selection

Screensaver

Negative image

Start

Function

2 

  change

1 

  select

Scrolling bar only

Overlay scrolling bar

Negative image

White screen

Negative image :

 Negative image will be displayed on the screen.

Scrolling bar only :

  A white bar will scroll from left to right. The image 

won't be displayed.

Overlay scrolling bar :

  The brightness of the image will be decreased 

and a white bar will scroll on it.

White screen :

 The whole screen will be white.

2

Start setting

2 

 set

1 

 select

The menu screen will disappear and the Screensaver will be activated. 

To 

stop the Screensaver under On, press any button.
Note: 

When the display is turned off, the Screensaver will be deactivated.

Select “Start”.

Screensaver

Negative image

Start

Function

2 

 access

1 

 select

Summary of Contents for TH-103VX200C






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands