Panasonic TH-103PF9EK, Service Manual, Page: 2 / 121

1 Applicable signals 4
2 Safety Precautions 5
2.1. General Guidelines 5
3 Prevention of Electro Static Discharge (ESD) to
Electrostatically Sensitive (ES) Devices 6
4 About lead free solder (PbF) 7
5 Service Hint 8
6 Disassembly 10
6.1. Rear Cover and Board 10
6.2. Location of Rear Cover screws 11
6.3. Removal of Side Angle (L), (R) 14
6.4. Removal of HA-Board 15
6.5. Removal of HDD-Board 15
6.6. Removal of DS-Board 15
6.7. Removal of HX-Board 16
6.8. Removal of DN-Board 17
6.9. Removal of PB-Board 17
6.10. Removal of H5-Board 17
6.11. Removal of D-Board 18
6.12. Removal of P-Board (MULTI_1), (MULTI_2) 18
6.13. Removal of P-Board (SUS_1), (SUS_2) 19
6.14. Removal of F-Board 19
6.15. Removal of PC-Board 19
6.16. Removal of SU-Board 20
6.17. Removal of SM-Board 21
6.18. Removal of SD-Board 21
6.19. Removal of SC-Board 22
6.20. Removal of SC2-Board 22
P
B
/ B (BNC), P
R
/ R (BNC) 0.7 Vp-p (75-ohm)
AUDIO IN (RCA PIN JACK × 2) 0.5 Vrms
PC (HIGH-DENSITY Mini D-SUB 15PIN) Y or G with / sync 1.0 Vp-p (75-ohm)
Y or G without / sync 0.7 Vp-p (75-ohm)
B / P
B
/ C
B
:0.7 Vp-p (75-ohm)
R / P
R
/ C
R
:0.7 Vp-p (75-ohm)
HD / VD:1.0 - 5.0 Vp-p (high impedance)
VBS (use HD port) with / picture 1.0 Vp-p (high impedance)
without / picture 0.3 Vp-p (high impedance)
AUDIO IN (M3 JACK) 0.5 Vrms
SERIAL EXTERNAL CONTROL TERMINAL (D-SUB 9PIN) RS-232C COMPATIBLE
AUDIO OUT RCA PIN JACK × 2 (L / R)
OUTPUT LEVEL : VARIABLE (- - 0 dB)
[INPUT 1KHz / 0dB, 10Kohm Load]
Accessories Supplied
Remote Control Transmitter
(UK) EUR7636070R
Remote Control Transmitter
(EK) EUR7636090R
Batteries (UK) 2 × AA Size
Batteries (EK) 2 × R6 Size
Fixing bands (TMME203 or TMME187) × 2
Dimensions (W × H × D) 95.0” (2,414 mm) × 56.0” (1,421 mm) × 5.0” (129 mm) (141 mm when including protruding portion of
slots)
Mass (weight)
main unit only (UK) approx. 485.0 lbs
main unit only (EK) approx. 220.0 kg net
Notes:
· Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.
· This equipment complies with the EMC standards listed below. EN55022, EN55024, EN61000-3-2, EN61000-3-3. (TH-103PF9EK)
CONTENTS
Page Page
2
TH-103PF9UK / TH-103PF9EK