Panasonic TH-103PB1E Operating Instructions Manual Download Page 31 | Manualshive

Page: 31 / 65

Panasonic TH-103PB1E Operating Instructions Manual Download Page 31

Sound

Normal

Normalise

Output Select

Normal

0

0
0

Off

Treble

0

Mid

Sound Mode

Balance

Bass

Surround

1/2

SPEAKERS

31

Sound Adjustment

1

Press to display the Sound menu.

Press to select the menu to adjust.

Select the desired level by listening to the sound.

2

Select to adjust each item.

While the “Sound” menu is displayed, if either the N button on the remote control is pressed at any time or the
ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.

Helpful Hint ( /

Normalise

Normalisation)

3

Press to exit from adjust mode.

SDI Sound Output

This menu is available only when selecting a slot that any of the following terminal boards is installed:
HD-SDI Terminal Board with audio (TY-FB10HD) or Dual Link HD-SDI Terminal Board (TY-FB11DHD)

2/2

Sound Out

Right Channel

Channel 1

Left Channel

Channel 1

Off

Level Meter

Off

SDI Sound Output

Item

Details

Left Channel

Channel 1 to Channel 16

Selects left audio channel.

Right Channel

Channel 1 to Channel 16

Selects right audio channel.

Sound Out

On

Off

On:

Enables audio output.

Off:

Disables audio output.

Level Meter

Off

1-8ch

9-16ch

Sets audio channels to show in the audio level meter.
8 channels are displayed in the audio level meter; 4 channels
each on both right and left sides of the display.

Off:

Hides the audio level meter.

1-8ch:

Displays the audio level meter (1-8ch)

9-16ch:

Displays the audio level meter (9-16ch)

Note:

Bass, Mid, Treble and Surround settings are memorized separately for each Sound Mode.

Item

Details

Output Select

Select the audio output.

SPEAKERS:

Internal speakers

AUDIO OUT:

AUDIO OUT terminal output

Notes:

• If “AUDIO OUT” is selected, only “Balance” can be set. The other menus are grayed out and cannot be set.
• The audio output options will be displayed when you adjust audio volume.

Volume (SPEAKERS)

30

• Audio volume and “Balance” settings are memorized separately for each audio output.

Sound Mode

Normal:

Emits the original sound.

Dynamic:

Accentuates sharp sound.

Clear:

Attenuates human voice.

Bass

Adjusts low pitch sounds.

Mid

Adjusts normal sounds.

Treble

Adjusts high pitch sounds.

Balance

Adjusts left and right volumes.

Surround

Select On or Off.

«
...
29
30
31
32
33
...
»

Summary of Contents for TH-103PB1E


































































Reviews:

No comments