Panasonic TG2480S Operating Instructions Manual Download Page 51

Page: 51 / 60

Useful Information

For assistance, please visit http://www.panasonic.com/consumersupport

Battery recharge

Power failure

Problem

Cause & solution

“

Recharge battery

” is

displayed,

flashes

or the handset beeps
intermittently.

Fully charge the battery (page 15).

“

Charge for 6h

” and

are displayed and

the handset does not
work.

The battery has been discharged. Fully charge the
battery (page 15).

I charged the battery fully,
but “

Recharge

battery

” is still

displayed and/or

continues to flash, or
“

Charge for 6h

” and

are displayed.

Clean the charge contacts and charge again (page 14).

The battery may need to be replaced (page 16). If you
install a new battery, fully charge it (page 14).

The CHARGE indicator
does not go out after the
battery has been
charged.

This is normal.

The handset display is
blank.

Confirm that the battery is properly installed.

Fully charge the battery (page 14).

Problem

Cause & solution

The unit will not function.

This product is not designed to make calls in the event
of a power failure. We recommend connecting a
standard telephone to the same telephone line in the
event that emergency calls need to be made during a
power failure (page 9).

TG2480(e).book Page 51 Monday, March 28, 2005 3:31 PM

Summary of Contents for TG2480S





























































Search results

Summary of Contents for TG2480S

Reviews:

Panasonic TG2480S, Operating Instructions Manual, Page: 51 / 60

Search results

Summary of Contents for TG2480S

Reviews: