Panasonic Technics OTTAVA f SC-C70MK2, Operating Instructions Manual, Page: 31 / 117

31
(Continued)
Wireless LAN connection
■
Preparation
Disconnect the AC mains lead.
Disconnect the LAN cable.
Place this unit as close to the wireless router as
possible.
Connect the AC mains lead to this unit. (
⇒ 27)
Note
• The setting will be cancelled after the set time
limit. In that case, try the setting again.
•
To cancel this setting in the middle, press [ ] or
turn the unit to standby mode.
• When the connection is established, “ ” is
displayed.
Network setting for the first time using
the “Google Home” app
1 Press [ ] to turn this unit on.
• “Wi-Fi Setup” is displayed.
2 Press [ ], [ ] to select “Yes” and then
press [OK].
3 Start the “Google Home” app and
follow the on-screen instructions.
( ⇒ 32)
Note
•
This unit will be displayed as “Technics-SC-
C70MK2-
****
” if the device name is not set.
(“
****
” stands for characters unique to each set.)
•
You can check your network information (SSID,
MAC address and IP address) from the “Google
Home” app or “Technics Audio Center” app.
•
Some items on the “Google Home” app are
irrelevant to this unit.
• When this unit is switched to standby mode and
turned on before the Wi-Fi setting is complete,
“Wi-Fi Setup” is displayed. Set “Wi-Fi Menu” to
“Off” to turn off the display.