background image

63

Support Information

 Specifications

 Wireless LAN Adapter

Power supply

DC 5V (USB powered) 500mA

Antenna

Tx 1, Rx 2

Interface

USB 2.0

Standard Compliance

IEEE802.11n / IEEE802.11a / IEEE802.11g / IEEE802.11b

Transmission system

MISO-OFDM system, OFDM system, DSSS system

Frequency Range

IEEE802.11n / IEEE802.11a :

5.150GHz - 5.725 GHz for EU Countries
5.150GHz - 5.850 GHz for USA, Canada
5.250GHz - 5.850 GHz for Taiwan

IEEE802.11g / IEEE802.11b / IEEE802.11n:

2.412 GHz - 2.472 GHz for EU countries
2.412 GHz - 2.462 GHz for USA, Canada, Taiwan

Transfer rate (standard) *

IEEE802.11n: Tx Max. 150Mbps, Rx Max. 300Mbps
IEEE802.11g / IEEE802.11a: Max. 54Mbps
IEEE802.11b: Max. 11Mbps

Access Mode

Infrastructure mode

Security

WPA2-PSK (TKIP/AES)
WPA-PSK (TKIP/AES)
WEP (64bit/128bit)

Dimension (WxHxD)

1.18 ” x 0.42 ” x 3.73 ” ( 30.00 mm x 10.72 mm x 94.85 mm)

Mass

0.88 oz (25  ) Net

*  Transfer rates are theoretical values; however, actual communication rate will vary according to communication environment or 

connected equipment.

This product incorporates the following software or technology:

(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation,
(3) the software developed by the Independent JPEG Group,
(4) the software developed by the FreeType Project,
(5) the software licensed under the GNU LESSER General Public License (LGPL) and/or,
(6) open sourced software other than the software licensed under the LGPL.
(7) Windows Media digital right management technology (WM-DRM) licensed by Microsoft Corporation or its affiliates.

For the software categorized as (5), please refer to the terms and conditions of LGPL, as the case may be at 
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html
In addition, the software categorized as (5) are copyrighted by several individuals. 
Please refer to the copyright notice of those individuals at
http://www.am-linux.jp/dl/DTV11U/
The LGPL software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, 
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
At least three (3) years from delivery of products, Panasonic will give to any third parry who contact us at the contact information 
provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-
readable copy of the corresponding source code covered under LGPL.
Contact Information
   [email protected]
Source code covered under LGPL is also freely available to you and any other member of the public via our website below.
http://www.am-linux.jp/dl/DTV11U/

For the software categorized as (5) and (6), please refer to the applicable license terms included in the “Setup” menu on product.

Further, for WM-DRM categorized as (7), please be aware of the following.
(a) This product is protected by certain intellectual property rights of Microsoft.
Use or distribution of this technology outside of this product is prohibited without a license from Microsoft or an authorized 
Microsoft subsidiary.
(b) Content providers are using the digital rights management technology for Windows Media contained in this device 
(“WM-DRM”) to protect the integrity of their content (“Secure Content”) so that their intellectual property, including
copyright, in such content is not misappropriated.  This device uses WM-DRM software to play Secure Content 
(“WM-DRM Software”).  If the security of the WM-DRM Software in this device has been compromised, owners of Secure Content 
(“Secure Content Owners”) may request that Microsoft revoke the WM-DRM Software’s right to acquire new licenses to copy, 
display and/or play Secure Content.
Revocation does not alter the WM-DRM Software’s ability to play unprotected content.  A list of revoked WM-DRM Software 
is sent to your device whenever you download a license for Secure Content from the Internet or from a PC.  Microsoft may, in 
conjunction with such license, also download revocation lists onto your device on behalf of Secure Content Owners.

Summary of Contents for TC-P60ST30







































































Reviews: