25
Advanced
How to Use Menu Functions
(picture, sound quality
, etc.)
(Continued)
Menu list
Menu
Item
Adjustments/Configurations (alternatives)
Setup
Channel surf mode
Sets the mode to select the channel with the Channel up/down button.
(All/Favorite/Digital only/Analog only)
•
Favorite: Only channels registered as FAVORITE. (p. 16)
Language
Selects the screen menu language.
Clock
Adjusts the clock. (p. 14)
ANT/Cable setup
Sets channels. (p. 13)
Input labels
Selects the terminal and label of the external equipment. (p. 37)
VIERA
Link settings
VIERA Link
Controls the equipment connected to HDMI terminals
(Off/On)
(p. 28)
•
“Power off link”, “Power on link”, “Energy saving mode”, “Unselected device energy save”
and “Default speakers” cannot be selected if “Off” is set.
Power on link
Sets “Power on link” of the HDMI connected equipment
(No/Yes)
(p. 28)
Power off link
Sets “Power off link” of the HDMI connected equipment
(No/Yes)
(p. 28)
Energy saving
mode
Sets “Energy saving mode” of the HDMI connected equipment.
(Quick start/Save)
(p. 28)
Unselected
device energy
save
Sets “Unselected device energy save” of the HDMI connected equipment. (p. 28)
(No (stay on)/Yes (with prompt)/Yes (no prompt))
Default speakers
Selects the default speakers
(TV/Theater)
(p. 28)
ECO/energy saving
Power save
Reduces screen brightness to lower power consumption. Eye-friendly for viewing in a dark
room.
(Standard/Saving)
No signal for 10
minutes
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION
continue for more than 10 minutes.
(Stay on/Power TV off)
Note
•
Not in use when “Auto power on”, “On/Off Timer” or “Lock” is set, or while “SD mode” or
“Digital Channel” is selected.
•
“No signal for 10 minutes was activated” will be displayed for about 10 seconds when
the TV is turned on for the first time after the power was turned off by “No signal for 10
minutes”.
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
No activity for 3
hours
To conserve energy, the TV automatically turns off when no operation of remote and side
panel key continues for more than 3 hours.
(Stay on/Power TV off)
Note
•
Not in use when “Auto power on” or “On/Off Timer” is set, or while “PC input” is selected.
•
“No activity for 3 hours was activated” will be displayed for about 10 seconds when the TV
is turned on for the first time after the power was turned off by “No activity for 3 hours”.
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
Advanced
setup
Auto power on
Turns TV On automatically when the cable box or a connected device is turned On
(No/Yes)
TV AC cord must be plugged into this device. TV comes on every time the power is restored.
•
The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto power on” is set.
(p. 38)
Image viewer
auto play
Set “Thumbnail” or “Slideshow” to play back SD cards automatically.
(Slideshow/Thumbnail/Set later/Off)
First time setup
Restart first time setup from “Language” setting. (p. 12)
About
Displays TV version and software license.
Reset to defaults
Performing Reset will clear all items set with Setup, such as channel settings.
Sub menu list
Menu
Item
Adjustments/Configurations (alternatives)
Setup
SUB MENU
Channel surf mode
Sets the mode to select the channel with Channel up/down button.
(All/Favorite/Digital only/Analog only)
Set favorite
Sets favorite channels. (p. 16)
Edit CH caption
Changes the station identifier. (p. 35)
Signal meter
Checks the signal strength if interference or freezing occurs on a digital image.
tc̲L32̲37̲C22̲eng̲0569 for US.in25 25
tc̲L32̲37̲C22̲eng̲0569 for US.in25 25
2009/12/21 20:49:48
2009/12/21 20:49:48
