Panasonic TC-43P250, Service Manual, Page: 9 / 39

http://servis-manual.com/
6. Adjust for best green electrical focus with green electrical focus adjustment VR.
7. Cover the Green, Red CRT lens, projecting Blue only.
8. Repeat step 4. ~ step 6. for blue electrical focus.
9. Cover the Green, Blue CRT lens, projecting Red only.
10. Repeat step 4. ~ step 6. for red electrical focus.
11. Receive an monoscope pattern.
12. Cover the Red, Blue CRT lens, projecting Green only.
13. If the center of the monoscope pattern is not inside the 15mm circle, shown in below, adjust
the centering magnets. Repeat the alignment magnet adjustments and four pole magnet
adjustments (step 1. ~ step 6.)
Centering magnet adjustment
14. Cover the Green, Blue CRT lens, projecting Red only.
15. Repeat step 13. for the red.
16. Cover the Green, Red CRT lens, projecting Blue only.
17. Repeat step 13. for the blue.
18. Following adjustments, fix the centering magnets of DY, dummy rings of VM coil, four pole
magnets of VM coil and the alignment magnets of VM coil to prevent them from moving.
TOP PREVIOUS NEXT