Panasonic TC-42PD1F, Service Manual

Page: 17 / 32

- 17 -
Alignment Setting
How to access Alignment
1) Press and hold the volume down / - button on the front panel of the unit and press the status [ ] button on the remote
control 3 times quickly within 1 second, this will place the unit into the CAT menu (Main service mode)
2) Press the STR button on the remote control.
3) Select the alignment Subject by the UP or DOWN button of the Cross buttons on the remote control.
4) Select the alignment item by the LEFT or RIGHT buttons of the Cross buttons on the remote control.
5) Adjust optimum setting by Volume Up / + and Down / - buttons.
(The reference figures below are normal and used for representative purpose only.)
Exit
6) To exit the IIC mode, press the menu button on the remote control.
To exit the CAT mode, access the ID mode by the down button of cross buttons and switch off the main power and
on again.
CAT
0
IIC
CD
IT
SD
OSD
ID
Mode
sys8.0
Mode
Mode
Mode
On/Off
Mode
INPUT - +
+
PAL : JUST Mid
Video signal adj.
R Cutoff
10 10
Subject
Items
New data
Original data
& !"