Panasonic T-Mobile KX-HDV130, Operating Instructions Manual

Page: 59 / 116

3.5 Before Leaving Your Desk
3.5.1 Setting Call Forwarding and Do Not Disturb
You can have incoming calls automatically forwarded to another destination. You can also have incoming
calls rejected (Do Not Disturb).
1.
Press
Menu
.
2.
Press [▲] or [▼] to select "FWD/DND", and then press
OK
.
3.
If the unit has multiple lines, press [▲] or [▼] to select the desired line, and then press
OK
.
4.
Press [▲] or [▼] to select the type of FWD or DND setting to apply, and then press
OK
.
The settings are as follows.
•
"DND"
(All incoming calls are automatically rejected.)
•
"Fwd(All)"
(All incoming calls are forwarded.)
•
"Fwd(Busy)"
(Incoming calls are forwarded only when your extension is in use.)
•
"Fwd(NA)"
(An incoming call is forwarded if you do not answer the call within a certain amount of time.)
5.
To set "DND"
a.
Press [▲] or [▼] to select "On" or "Off".
b.
Press
OK
.
6.
To set "Fwd(All)" or "Fwd(Busy)"
a.
Press [▲] or [▼] to select "On/Off", and then press
OK
.
b.
Press [▲] or [▼] to select "On" or "Off" and then press
OK
.
*1
c.
Press [▲] or [▼] to select "Phone Number", enter a forward destination phone number, and then
press
OK
.
*2
7.
To set "Fwd(NA)"
a.
Press [▲] or [▼] to select "On/Off", and then press
OK
.
b.
Press [▲] or [▼] to select "On" or "Off" and then press
OK
.
*1
c.
Press [▲] or [▼] to select "Phone Number", enter a forward destination phone number, and then
press
OK
.
*2
d.
Press [▲] or [▼] to select "Ring Count", enter the number of rings before the call is forwarded, and
then press
OK
.
*3
*1
When you select "Off", the subsequent operations can be omitted.
*2
When "Phone Number" is already set, this step can be omitted.
*3
When "Ring Count" is already set, this step can be omitted.
Note
•
When Call Forwarding and/or Do Not Disturb is enabled, /
Fwd
and/or /
DND
appears
on the display in standby mode.
3.5 Before Leaving Your Desk
Document Version: 2017-08 Operating Instructions 59