HOLD_ALARM_GAIN
Value Format
INTEGER
Description
Specifies the gain, in decibels, of the hold alarm.
Value Range
-24–24 (dB)
Default Value
0
CW_TONE1_FRQ
Value Format
Comma-separated Integer
Description
Specifies the dual-tone frequencies, in hertz, of call waiting tone 1 using
2 whole numbers separated by a comma.
Value Range
0, 200–2000 (0: No tone)
Default Value
425
CW_TONE1_GAIN
Value Format
INTEGER
Description
Specifies the gain, in decibels, of call waiting tone 1.
Value Range
-24–24 (dB)
Default Value
0
HOLD_TONE_FRQ
Value Format
Comma-separated Integer
Description
Specifies the dual-tone frequencies, in hertz, of the hold tone using 2
whole numbers separated by a comma.
Value Range
0, 200–2000 (0: No tone)
Default Value
425
HOLD_TONE_GAIN
Value Format
INTEGER
Description
Specifies the gain, in decibels, of the hold tone.
Value Range
-24–24 (dB)
Default Value
0
Document Version 2015-12
Administrator Guide
289
5.3.32 Tone Settings
Summary of Contents for T-Mobile KX-HDV130
