Panasonic T-Mobile KX-HDV130 Administrator'S Manual Download Page 156

Page: 156 / 332

4.7.2.1 Firmware Maintenance

Enable Firmware Update

Description

Selects whether to perform firmware updates when the unit detects a
newer version of firmware.

Note

•

Manual firmware updates from the Web user interface (

see

4.7.3 Upgrade Firmware

) can be performed regardless of this

setting.

•

Firmware updates using TR-069 can be performed regardless
of this setting.

Value Range

•

Yes

•

Default Value

Yes

Configuration File Reference

FIRM_UPGRADE_ENABLE (Page 193)

Firmware File URL

Description

Specifies the URI where the firmware file is stored.

Note

•

This setting is available only when

[Enable Firmware

Update]

is set to

[Yes]

Value Range

Max. 384 characters

Default Value

Not stored.

Configuration File Reference

FIRM_FILE_PATH (Page 194)

4.7.3 Upgrade Firmware

This screen allows you to download the Upgrade Firmware data from the HTTP server.
You can upgrade the firmware manually, irrespective of the

[Enable Firmware Update]

setting.

Note

•

After the firmware has been successfully updated, the unit will restart automatically.

156

Administrator Guide

Document Version 2015-12

4.7.3 Upgrade Firmware

Summary of Contents for T-Mobile KX-HDV130













































































































































































































































































































































Search results

Summary of Contents for T-Mobile KX-HDV130

Reviews:

Related manuals for T-Mobile KX-HDV130

Brands by name

Popular brands

Panasonic T-Mobile KX-HDV130, Administrator'S Manual

Search results

Summary of Contents for T-Mobile KX-HDV130

Reviews:

Related manuals for T-Mobile KX-HDV130

Brands by name

Popular brands