Panasonic Switch-M12PWR, Operation Manual

Page: 48 / 240

48
4
4
.
.
6
6
.
.
5
5
.
.
P
P
o
o
r
r
t
t
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
E
E
x
x
t
t
e
e
n
n
d
d
On the Basic Switch Configuration Menu, pressing "e" opens the Port
Configuration Extend Menu, as shown in Fig. 4-6-9. On this screen, you can
configure port status display settings and port settings.
Fig. 4-6-9 Port Configuration Extend Menu
Screen Description
Port Displays the port number.
Trunk Displays the group number for a trunked port.
Type Displays the port type.
100TX
The port type is 10/100BASE-TX.
1000T The port type is 10/100/1000BASE-T.
1000X The port type is SFP extension port.
Link Displays the current link status.
Up
A link has been established successfully.
Down A link has not been established.
Port Name Displays the port name.
Jumbo
Displays the jumbo frame settings. For all ports, 'Disabled' is the factory
default setting.
Enabled Jumbo frame is enabled.
Disabled Jumbo frame is disabled.
EAP Pkt
FW Displays the EAP packet forwarding function settings. For all ports,
'Disabled' is the factory default setting. Set this item to "Discard" to discard
EAP packets.
Enabled
The EAP Packet Forwarding function is enabled.
Disabled The EAP Packet Forwarding function is disabled.
PN23129K/PN23129A Local Management System
Basic Switch Configuration -> Port Configuration Extend Menu
Port Trunk Type Link Port Name Jumbo EAP Pkt FW
---- ----- ----------- ---- --------------- -------- ------------
1 --- 100TX Down Port_1 Disabled Disabled
2 --- 100TX Down Port_2 Disabled Disabled
3 --- 100TX Down Port_3 Disabled Disabled
4 --- 100TX Down Port_4 Disabled Disabled
5 --- 100TX Down Port_5 Disabled Disabled
6 --- 100TX Down Port_6 Disabled Disabled
7 --- 100TX Down Port_7 Disabled Disabled
8 --- 100TX Down Port_8 Disabled Disabled
9 --- 100TX Down Port_9 Disabled Disabled
10 --- 100TX Down Port_10 Disabled Disabled
11 --- 100TX Down Port_11 Disabled Disabled
12 --- 100TX Down Port_12 Disabled Disabled
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page Set Port N[a]me
[P]revious Page Set [J]umbo Status
[Q]uit to previous menu Set [E]AP Packet Forwarding
Command>
Enter the character in square brackets to select option