33
RQT8630
≥
Insert an SD Memory card
with free space on it.
≥
Press
1
/
∫
to turn the power on.
1. Select [VOICE REC] mode.
(P22)
2. Press MARK, face the
microphone and record.
≥
Press
1
/
∫
or MARK to stop
recording.
≥
During recording, each time you
press
the display changes:
recording time
>
remaining
time
>
file name.
≥
Do not cover the microphone
during recording.
∫
About file names
The “xxx” in a [
VOICExxx
]
([
TUNERxxx
]) file name is the
recording counter. It increases by 1
from [001] to [300] each time a
recording is made. Even if you erase
selected files, the recording counter
of the next file recorded is 1 more
than the last file recorded and you
cannot record any more files when
the counter number reaches [300].
In this case, erase unwanted files
and then select [RENUMBER] to
renumber the recording counter of
all the recorded files.
≥
The recorded sound is
automatically set in [VOICE
REC] mode. You cannot adjust
the volume while recording.
≥
Recorded files are saved with
the file name “VOICExxx”.
≥
You can record files from
[VOICE001] to [VOICE300].
∫
About Recording (FM
recording and Voice
recording)
≥
This unit does not have a clock
function so the recording date
and time of files recorded on this
unit is shown as [2006/01/01/
00:00] on Voice Editing. The
recording date and time can be
changed on Voice Editing,
however the file format must be
converted from a WAVE file to a
VM1 file. For details, refer to the
PDF operating instructions for
Voice Editing.
≥
One file can be recorded
continuously for up to
approximately 12 hours.
(Recording stops automatically
about 12 hours after it starts.)
≥
When the remaining memory
becomes less than 10 minutes
while recording, the status
indicator starts flashing more
rapidly.
≥
Recorded files are monaural.
Voice recording
(VOICE REC mode)
only
SV-SD770V
1
:
REC.
MARK
∫
s
20：20：50
1
NOW
RECORDING
REC
µ
0：05
SV-SD770V.book 33 ページ ２００６年３月１５日 水曜日 午後１時３１分
Summary of Contents for SV-SD710V
Page 47: ...47 RQT8630 Note ...
