9
RQT8640
∑
Clip holder
(RFC0112-K)
1
How to attach
2
How to detach
≥
Hold the unit firmly and then
press the hole on the back of the
clip holder to detach the unit.
≥
The clip holder is designed
for the included stereo
earphones. If you attach
other earphones, you may
not be able to use it.
∫
Attaching/Detaching the
strap holder with
earphones (SV-SD570V
only)
You can enjoy the D-snap Audio
while active by using the strap
holder with earphones.
1. Insert the plug for the strap
holder with earphones into
the earphones jack on the
unit.
≥
Insert the plug as far as it will
go.
2. Place the covers
2
over
the sides
1
of the unit.
If the strap
becomes twisted,
turn the toggle to
adjust it.
The toggle will
come apart if
pulled strongly. If
the toggle comes apart, attach it
again.
When not using
the earphones for
the strap holder
with earphones,
attach them to the
clips on the strap.
When detaching the
strap holder with
earphones, take off
the covers and then
remove the plug.
≥
The cord of the
strap holder with earphones is
shorter than the cord of the
stereo earphones so receiver
sensitivity may decrease.
≥
You cannot insert or remove
the rechargeable battery and
the SD Memory card or
connect the AC adaptor and
USB cable when the strap
holder with earphones are
attached.
1
2
1
2
1
2
1
2
SV-SD370V.570V_English.book 9 ページ ２００６年４月２０日 木曜日 午後１時１８分
