16
1
Supplied accessories
□
*
SD memory card—1pc.
□
Case—1pc.
(Case: RPQ1073, Cushion: RPN1319)
□
*
Rechargeable battery—1 pc.
□
*
USB Reader/Writer—1 pc.
□
Charger
(DE-820BA)—1 pc.
□
CD-ROM
□
Lanyard hook
(RFE0066)—1 pc.
(RFE0072)—1 pc.
Use numbers indicated in parentheses when asking for replacement parts.
Refer to page 16 for the parts marked with an asterisk (
*
).
This manual was printed
with soy based ink.
Specifications
Sampling rate:
32 kHz, 44.1 kHz, and 48 kHz
Compression/decompression: AAC and MP3
No. of channels:
Stereo, 2 channels
Frequency response:
20 Hz to 20,000 Hz (+0 dB, -6 dB)
Output level:
5 mW + 5 mW (16
Ω
)
Power supply:
DC 1.2 V (one rechargeable battery)
DC 1.5 V (one LR03, AAA, AM-4 battery)
Approximate play time:
5 hours (When the included recharge-
able battery is fully charged)
6 hours (Panasonic alkaline battery)
Maximum dimensions (WxHxD):
unfolded:
150 x 169 x 40 mm
(5
7
/
8
" x 6
5
/
8
"x 1
5
/
16
")
folded:
79 x 109 x 52 mm
(3
1
/
8
" x 4
5
/
16
" x 2
1
/
16
")
Cabinet dimensions (WxHxD):
unfolded:
150 x 169 x 38 mm
(5
7
/
8
" x 6
5
/
8
" x 1
1
/
2
")
folded:
77 x 109 x 52 mm
(3" x 4
5
/
16
" x 2
1
/
16
")
Mass:
104 g (3.7 oz) with battery
92 g (3.2 oz) without battery
• Specifications are subject to change without notice.
• The play times shown depend on operating conditions.
(Low temperatures can reduce the operational life of the alkaline battery.)
• Mass and dimensions are approximate.
• SD logo is a trademark.
• Portions of this product are protected under
copyright law and are provided under
license by ARIS/SOLANA/4C.
En
SD Audio Player
Operating Instructions
Model No.
SV-SD05
S
D
A
U
D
IO
P
L
A
Y
E
R
S
V
-S
D
0
5
Before connecting, operating or adjusting this product, please
read these instructions completely. Please keep this manual for
future reference.
C 2000 Matsushita Electric Industrial Co., Ltd.
RQT5658-P
M1200YN0
P
Panasonic Consumer Electronics Company, Division of
Matsushita Electric Corporation of America
One Panasonic Way Secaucus, New Jersey 07094
http://www.panasonic.com/sd
Panasonic Sales Company, Division of Matsushita Electric of
Puerto Rico, Inc. (“PSC”)
Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
Printed in Japan
READ BEFORE USE
After checking the included accessories (see below), follow these steps to
record onto (checkout) the included SD memory card.
1. Install the driver software for the USB Reader/Writer and the
Panasonic Media Manager software from the included CD-ROM.
2. Connect the USB Reader/Writer to your personal computer.
3. Record (checkout) some music to the SD memory card with Panasonic
Media Manager.
Read the operating instructions for Panasonic Media Manager for details.
Dear Customer
Thank you for purchasing this product.
For optimum performance and
safety, please read these instructions carefully.
Optional accessories
■
SD memory card
(as of December 1st, 2000)
• RP-SD064 (64 MB) • RP-SD032 (32 MB)
■
Personal computer card adapter
To connect to a personal computer card slot instead of using the USB
connector, obtain the personal computer card adapter, part number
BN-SDABPU/1B.
■
USB Reader/Writer
Replacement part number: BN-SDCAPU/1B
■
Rechargeable battery
Replacement part number: HHR-4UPA/2B
CAUTION:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment gen-
erates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any unauthorized changes or modifications to this equipment would
void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause unde-
sired operation.
This Manual is an overseas version and some details may
differ from Instructions enclosed with products sold in
Australia
Summary of Contents for SV-SD05
Page 6: ...12 13...