6
English
HOW TO USE (Rice Cooking)
1. Measure rice with the measuring cup provided (refer to the
specifi cations table on last page). Wash the rice in a separate
bowl until water is relatively clear.
Bowl
2. Put the washed rice into the pan. Add water according to the
water level indicator on the pan. For example, when cooking 5
cups of rice, pour water until water level indicator “5”.
The water level indicator of the pan is for
reference. Adjust the amount of water to your
personal taste. Level the rice evenly after water
adjustment is completed.
3. Place the pan into the body. Make sure that the pan is directly in contact with heating
plate by turning it slightly to the right and to the left until it sits properly.
NOTE: If the outer surface of the pan is wet, it may cause a cracking noise
when the rice cooker heats up. This may damage the rice cooker, so
make sure that it is in dry condition before use.
4. Close the outer lid until it clicks.
Please make sure that the steam cap is properly attached.
NOTE: If the outer lid is not closed securely, the cooking effi ciency will be
affected.
5. Attach the connector to the rice cooker socket and plug to the
power supply source.
NOTE: Do not plug in until just before start to cook.
6. Press the select switch to ‘Rice’ and switch on the power supply source.
The keeping warm indicator will light up when power supply source is ‘ON’.
To start cooking, press the switch button down.
Cooking indicator will light up, indicating that rice cooking has been started.
NOTE: If the pan is not placed in body, the switch button cannot
be engaged when press down.
Be aware of the hot steam comes out from the steam cap
on top of the outer lid during cooking.
Do not cover the outer lid with a cloth or anything during
cooking or keeping warm because deformation or
discoloration may occur.
7. When the cooking is completed, the switch button will pop up. At the same time, the cooking indicator will goes
off and the keeping warm indicator will light up indicating that the keep warm function has been taken place.
The outer lid should remain closed even after the cooking process is completed for at least 15 minutes.
Then mix the rice well with rice scoop to allow vapor to escape.
NOTE:
•
After the cooking process is completed, the keep warm process will
take place automatically until the main supply is off.
•
Open the outer lid slowly as to avoid water dripping out from the outer
lid.
•
The switch button should not be pressed into the cooking position
during the keep warm cycle.
•
Do not keep warm for more than 5 hours.
•
Do not close the outer lid with the rice sticking to the rim of the pan.
It will reduce the effectiveness of the keep warm operation.
8. When you do not wish to keep warm, switch off the power supply source and unplug.
SR-TP184
Plug
Connector
SR-TP184
SR-TP184
SR-TP184
RZ19CZ01 T0914-0_MA.indb 6
RZ19CZ01 T0914-0_MA.indb 6
10/9/57 BE 9:47 AM
10/9/57 BE 9:47 AM
