SR-TEM180_100_08.pdf 1 07/10/2020 10:28
After Use
Be sure to unplug and carry out these operations when the appliance is cooled down.
Do not use cleaning objects such as benzine, thinner, cleansing powder or metal scrubbers.
Parts need to be cleaned after every use.
Fit the projection on the Steam Cap
into the hollow of the Valve Holder.
Turn the Valve Holder to the right
until it clicks.
Do not use a dishwashing
detergent.
Wipe with a damp cloth.
If an object has stuck on the
Cast Heater and Temperature
Sensor, lightly polish it off using
¿QHVVDQGSDSHU
(of about
# 600) / steel wool. Then wipe
with a damp cloth.
Wash with sponge and diluted dishwashing detergent after use.
160
120
80
40
EN8
Empty the Dew Collector.
Remove and clean after
every use.
Wash with a diluted
dishwashing detergent and
sponge and wipe off the
external surface of the
Inner Pan.
Hold and pull off the Inner Lid to remove
in the direction of the arrow.
Should be cleaned with sponge. (Do not use
abrasive cleaners or steel wool.)
Removal
Slide the Inner Lid onto the Inner Lid Holder Shaft.
Install
Face the large rubber lip of the Inner Lid Packing
towards the Outer Lid.
The small side of the Inner Lid Packing should
face you when the Outer Lid is open.
Clean after every use.
Valve Packing
Rubber Gasket
How to remove and clean
1. Pull off the Steam Cap to
remove it as shown in the
¿JXUH
2. Remove the Valve
Holder by turning it
counterclockwise.
Wash and wipe with
a damp cloth.
3. Wipe the inside of the
H[KDXVWRXWOHWV
and Outer Lid plate with a damp cloth.
Please wipe it whenever you use it.
Please do not remove the Steam
Cap when the appliance is in use.
Do not remove the Rubber
Gasket and Valve Packing.
Clean after every use.
Inner Lid
Body / Outer Lid
Inner Pan
Dew Collector
Accessories
How to assemble the
Steam Cap
Cast Heater /
Temperature Sensor
Steam Cap
1
2
H[KDXVWRXWOHWV
