Panasonic SR-SAT18, Operating Instructions Manual

Page: 17 / 18

32 33
What to do when...
O
If the suggestions on P.30 to 31 do not bring about any
improvement, you can change the settings.
O
After the setting is completed, the display returns to the
current time.
O
Steps 2, 3 and 4 must each be completed within 16 seconds.
When no operation is performed for 16 seconds, the display
returns to the current time. (Setting cannot be made.)
­
Please restart the procedure.
O
To go back to the previous setting, follow the procedure again.
To increase the keep warm
temperature.
(60 to 74 degrees.)
1 Press
Press and select “Quick”
Flashing
O
Select “Quick” under “White
Rice”.
2 Press
You will not hear
a beep.
Press
You will not hear
a beep.
Press
3 Press
4 Press
Set to
“74”.
Pressing the button cycles through
the temperatures (order of 74, 76,
72, 60, 74).
After 4 seconds
( Setting ends )
automatically.
O
Do not use the keep warm function
more than 12 hours.
O
If an odour is generated after the
change, set to “76”. If the rice is
discoloured or dry, set to “72”.
O
The default setting is “60”.
O
ECONAVI will not operate after the
change.
If you find the sound of
the pump distracting during
the keep warm state. (P.15)
1 Press
Press and select “Quick”
Flashing
O
Select “Quick” under “White
Rice”.
2 Press
You will not hear
a beep.
Press
You will not hear
a beep.
Press
3 Press
Select
“04”.
Press
4 Press
Delete
“Steam”.
After 4 seconds
(
Setting ends
)
automatically.
O
After the change, no steam will be
used during the keep warm state.
O
The sound of the pump will still be
heard during cooking and reheating.
To stop the buzzer sounding
(end sound) during cooking,
reheating and cleaning.
1 Press
Press and select “Quick”
Flashing
O
Select “Quick” under “White
Rice”.
2 Press and hold down
(for approximately 5 seconds)
O
This change does not switch off the
button sounds.
If burning is
a concern.
1 Press
Press and select “Quick”
Flashing
O
Select “Quick” under “White
Rice”.
2 Press
You will not hear
a beep.
Press
You will not hear
a beep.
Press
3 Press
Select
“02”.
Press
4 Press
Set to
“So:Lo”.
After 4 seconds
(
Setting ends
)
automatically.
If sound of the fan
(in the Outer Lid) is a
concern.
1 Press
Press and select “Quick”
Flashing
O
Select “Quick” under “White
Rice”.
2 Press
You will not hear
a beep.
Press
You will not hear
a beep.
Press
3 Press
Select
“05”.
Press
4 Press
Set to
“FA:Lo”.
After 4 seconds
(
Setting ends
)
automatically.
O
After the change, the temperature of
steam exiting from the Exhaust Unit
will increase.
What t
o
do when...