Panasonic SR-JN105, Operating Instructions Manual

Page: 6 / 32

6
English
How to Use (Rice Cooking)
1. Measure rice with the measuring cup provided (refer to the
specifi cations table on page 10). Wash the rice in a separate
bowl until water is relatively clear.
Bowl
Correct Incorrect
2. Put the washed rice into the pan. Add water according to the
water level indicator on the pan. For example, when cooking 5
cups of rice, pour water until water level indicator “5”.
• Put the pan on a hard, flat and stable surface to add water.
• Hot water is not recommended for cooking as it may result
in soggy rice.
The water level indicator of the pan is for
reference. Adjust the amount of water to your
personal taste. Level the rice evenly after water
adjustment is completed.
3. Place the pan into the body. Make sure that the pan is directly in contact with heating
plate by turning it slightly to the right and to the left until it sits properly.
NOTE: If the outer surface of the pan is wet, it may cause a cracking noise
when the rice cooker heats up. This may damage the rice cooker, so
make sure that it is in dry condition before use.
4. Close the outer lid until it clicks.
Please make sure that the steam cap and the inner lid is properly attached.
NOTE: If the outer lid is not securely closed, cooking effi ciency will be affected.
5. Attach the instrument plug to the rice cooker socket and
power plug to the power outlet.
NOTE: Do not plug in until just before start to cook.
6. Press the switch button down to start cooking.
NOTE: If the pan is not placed in the body, the switch button cannot
be engaged when press down.
Be aware of the hot steam comes out from the steam cap
on top of the outer lid during cooking.
Do not cover the outer lid with a cloth or anything during
cooking or keeping warm because deformation or
discoloration may occur.
7. When the cooking is completed, the switch button will pop up. At the same time, the cooking indicator will goes
off and the keep warm indicator will light up indicating that the keep warm function has been taken place.
The outer lid should remain closed even after the cooking process is completed for at least 15 minutes.
Then mix the rice well with rice scoop to allow vapor to escape.
NOTE: • After the cooking process is completed, the keep warm process will
take place automatically until the power outlet is disconnected.
• Open the outer lid slowly as to avoid water dripping out from the outer
lid.
• The switch button should not be pressed into the cooking position
during the keep warm process.
• Do not keep warm for more than 5 hours.
• Do not close the outer lid with the rice sticking to the rim of the pan.
It will reduce the effectiveness of the keep warm function.
8. When you do not wish to keep warm, disconnect the power plug from the power
outlet.
Pan
Power plug
Power
outlet
Rice cooker
socket
Instrument
plug
Keep Warm Rice Cook
Rice Cook
Keep Warm
Power plug
Power
outlet
Book-O (Malaysia) EN.indd 6 Book-O (Malaysia) EN.indd 6 12/8/15 4:14 PM 12/8/15 4:14 PM