27
8 Disassembly and Assembly Instructions
8.1.
Tuner box
8.1.1.
Remove the Top case
1. See Service Hint (Section 3.1.1.)
8.1.2.
Remove the Rear panel
1. Remove the screws (
×
4 ,
×
4
,
×
2 )
2. Remove the Rear panel.
8.1.3.
Remove the Q-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Disconnect the connector (P1).
2. Disconnect the bridge connector (A10-P9).
3. Remove the screws (
×
4
) and remove the Q-Board.
4. Remove the Q-board barrier.
8.1.4.
Remove the Front panel assy
1. Remove the claws (
×
2 ,
×
2 ,
×
3
) and remove
the Front panel assy.
8.1.5.
Remove the K-Board
1. Remove the Front panel assy. (See section 8.1.4.)
2. Remove the screws (
×
3 ).
3. Disconnect the connector (K12) and remove the K-Board.
8.1.6.
Remove the G-Board
1. Remove the Front panel assy. (See section 8.1.4.)
2. Remove the screws (
×
6 ,
×
1
) and remove the
Front terminal shield.
3. Remove the screws (
×
2
) and remove the Terminal
rear shield.
4. Disconnect the bridge connectors (A51-G51 and A52-
G52).
Summary of Contents for SP-54Z1A
