8
TQBS0399
Bluetooth
®
connection
By using the Bluetooth
®
connection, you can listen
to the sound from the Bluetooth
®
audio device
from this system wirelessly.
• Refer to the operating instructions of the Bluetooth
®
device
for further instruction on how to connect a Bluetooth
®
device.
Preparation
• Turn on the Bluetooth
®
feature of the device and
place the device near this system.
1
Press [ ] to select “ ”.
• If the “
” indicator flashes quickly, go to step 3.
2
Press and hold [ ] until the “ ”
indicator flashes quickly.
• If the “
” indicator flashes slowly, repeat step 2.
3
Select “SOUNDSLAYER” from the
Bluetooth
®
device’s Bluetooth
®
menu.
• If prompted for the passkey on the Bluetooth
®
device, enter “0000”.
• Once the Bluetooth
®
device is connected, the
“
” indicator stops flashing and lights up.
• You can register up to 8 devices with this system. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.
1
Press [ ] to select “ ”.
• If the “
” indicator lights, a Bluetooth
®
device is
already connected with this system. Disconnect
it. (
>
below)
2
Select “SOUNDSLAYER” from the
Bluetooth
®
device’s Bluetooth
®
menu.
∫
Disconnecting a Bluetooth
®
device
Press and hold [ ] until the “ ” indicator flashes.
• This system can only be connected to one device at a time.
Troubleshooting
Before requesting service, make the following checks.
If you are in doubt about some of the check points, or
if the solutions indicated in the following guide do not
solve the problem, consult your dealer for instructions.
• More detailed operating instructions are available in
“Operating Instructions (PDF format)”. (
>
3)
Unit care
∫
Clean this system with a soft, dry cloth
• When dirt is heavy, wring a cloth moistened in water
tightly to wipe the dirt, and then wipe it with a dry cloth.
• Never use alcohol, paint thinner or benzine to clean this system.
• Before using chemically-treated cloth, carefully read the
instructions that came with the cloth.
∫
To dispose or transfer this system
This system may keep the user settings information in this
system. If you discard this system either by disposal or
transfer, then follow the procedure to return all the settings
to the factory presets to delete the user settings.
• The operation history may be recorded in the memory of
this system.
Bluetooth
®
pairing
Connecting a paired Bluetooth
®
device
To return to the factory defaults.
While this system is on, press and hold [
Í
/I] on this
system for more than 4 sec. (All the indicators will
blink twice when this system is reset.)
For further dedicated help, support and
advice about this system please visit:
https://panasonic.jp/support/global/cs/
(This site is in English only.)
SC-HTB01_EB_TQBS0399.book 8 ページ ２０２０年６月２５日 木曜日 午前９時５５分
