Panasonic Sonic Vibration Toothbrush, Operating Instructions Manual

Page: 19 / 380

19
Engli
sh
Cleaning the main unit
Wash the main unit under
running water.
•Do not damage or rub the
waterproof rubber seal (
A
) with
hard materials.
Do not leave the main unit under
water. Water may enter inside.

•Do not wash with water hotter than 40 °C.
Doing so may damage the main unit.
Cleaning the AC adaptor and the charging stand
Remove dirt with a dry
cloth.
•Do not wash with water.
Cleaning the brush stand
Wash and wipe off water.
Cleaning the carrying case
1. Remove the inner frame.
1
Hold the right end of the
carrying case.
2
With the right end of the
inner frame facing up, pull up
the inner frame.


2. Wash with water and
wipe off water.
► After cleaning
Wipe off water from the brush head and main unit for storage.
•Do not charge while it is wet. Doing so may cause soiling.
►
If the identification ring comes off
Attach by aligning the indentation (
a
) in
the brush head with the raised part (
b
)
of the inside of the identification ring.
 
• Do not forcefully pull the identification ring.
Doing so may cause damage.
• Using the toothbrush without the identification ring
has no effect on its performance.