- 10 -
How to Operate
4
Press Power Level Selector pad four times.
☛
The selected power level will be indicated, “PROG” and 1st Stage
Heating Indicator “1” will start to blink.
POWER
1
1
PROG
A
STAGE
DEF
5
Set the desired heating time using Timer Dial.
☛
The set heating time will appear.
Note: up to 15 min. on HI or MED, 60 min. on LOW, DEF or HOLD
1
1
PROG
A
STAGE
DEF
6
Press Program Entry Button again.
☛
“PROG” and 1st Stage Heating Indicator “1” will stop blinking.
This means that you have completed programming.
PROG
1
1
PROG
A
STAGE
DEF
• Three seconds later, Digital Display Window will go blank.
Note:
• Program the remaining Memory pads as desired by repeating steps 2-6 above.
• When you want to select Memory Area B, press Memory Shift pad
before selecting the desired Memory pad
(step 3).
SHIFT
A
B
(AM) (PM)
3
Press Memory pad you wish to program.
☛
The selected pad number will appear and currently programmed
information will be indicated.
5
1
1
PROG
A
STAGE
HI
C. PROGRAMMING MEMORY PADS
◆
Single stage heating
INSTRUCTION
DIGITAL DISPLAY WINDOW
PAD
2
Press Program Entry Button.
☛
“PROG” will start to blink.
PROG
PROG
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (see page 11)
DO NOT OPEN THE DOOR WHILE PROGRAMMING!
Example: To program cooking on DEFROST power for 1 minute into Memory pad “5”
1
Keep the door closed.
☛
Digital Display Window must be blank or show “0”.
