6
CONNECTION
Take care that wrong wiring will damage the product.
Do not short-circuit “0V” and “G” on the
S-LINK V
terminal block connector side.
" > ? >"
the load. Use wires having sufficient current capacity. Further, when supplying
power to the load from
SL-VGU1-EC
, make sure not to exceed the allowable
through current.
@ > ! &
out. The tightening torque should be 0.5N·m, or less.
Do not apply solder, etc., on the tips of the wires to be connected to the terminal
block. This can cause loosening of the screws, resulting in wire disconnection.
<S-LINK V terminal block connector side terminal arrangement>
No.
Designation
Description
8
ERR
Error output
7
Main
line
G
Black
6
D
White
5
0V
Blue
4
24V
Brown
3
Input
0V
External power supply input
2
24V
1
FG
Frame ground
<EtherCAT connector side terminal arrangement>
No.
Designation
Description
1
TX+
Transmitted data +
2
TX-
Transmitted data -
3
RX+
Received data +
4
Not used
-
5
Not used
-
6
RX-
Received data -
7
Not used
-
8
Not used
-
7
SPECIFICATIONS
Designation
S-LINK V
gateway controller for EtherCAT
Model No.
SL-VGU1-EC
Supply voltage
24V DC
+10
-5
%
Current consumption
300mA or less (excluding error output load and power supply for driving I/O units)
(Note 1)
Allowable through current
7A (Note 2)
S-LINK V
system side
Transmission speed
A mode: 110kbps, B mode: 27.5kbps, C mode: 6.9kbps
Refresh time
A mode: 0.29 to 10.32ms, B mode: 1.18 to 41.29ms, C mode: 4.70 to 165.15ms
I/O points
Max. 512
Connected node No.
Max. 256 nodes
Transmission distance
A mode: 50m max., B mode: 200m max., C mode: 800m max.
Total wiring length
A mode: 100m or less, B mode: 400m or less, C mode: 1,600m or less
Transmission cable
Z?[\ !;]^
2
) or conductor cross-section area 0.3 to 2.0mm
2
4-core VCTF cable (without shield) (Note 3)
I/O combination
I/O settable in increments of 32 points.
Error output
NPN open-collector transistor
EtherCA
T
communication side
Protocol
CoE PDO communication, SDO communication
Compliance
IEEE802.3u (100BASE-TX)
Transmission speed
100Mbps (100BASE-TX)
Transmission connector
RJ-45 × 2
Distance between
nodes
100m or less
Max number of station
connections
4,095 stations (65,535 stations when set from master side)
Transmission cable
Category 5e or more
Ambient temperature
0 to +55ºC (No dew condensation), Storage: -20 to +70ºC
Ambient humidity
10 to 90% RH, Storage: 10 to 90% RH
Material
Enclosure: ABS
Weight
Approx. 140g
Notes: 1) The current consumption value shown here is the total of the maximum current (D-G line only) supplied to the
S-LINK V
I/O units and the current consumption of the
S-LINK V
gateway controller.
2) This product is not equipped with any short-circuit protective function. For this reason, select a power supply
unit having short-circuit protective function (fuse, etc.).
3) The VCTF cable is the vinyl cabtyre cable that conforms to the requirements of JIS C 3306 “Polyvinyl chloride
?! _
4) In case connecting to commercially offered product, be sure to check with this product. Station No., transmis-
sion distance, transmission speed depend on the connected product.
8
DIMENSIONS (Unit: mm)
37.5
6.3
100
8
5
66
(12)
8
48
92
40
Suitable for 35mm width DIN rail
2-ø4.4 mounting holes
9
CE MARKED PRODUCT
The models listed under “
7
SPECIFICATIONS
” conform to CE Marking.
Contact for CE
<Until June 30 ,2013>
Panasonic Electric Works Europe AG
Rudolf-Diesel-Ring 2, D-83607 Holzkirchen, Germany
<From July 1 ,2013>
Panasonic Marketing Europe GmbH Panasonic Testing Center
Winsbergring 15, 22525 Hamburg,Germany
http://panasonic.net/id/pidsx/global
2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan
Phone: +81-568-33-7861 FAX: +81-568-33-8591
About our sale network, please visit our website.
PRINTED IN JAPAN
© Panasonic Industrial Devices SUNX Co., Ltd. 2013
