Panasonic SL-DT100GCS, Service Manual

Page: 14 / 104

/on button again to turn it on again.
- The contents of self-diagnosis function are stored in memory. To re-
display, perform the procedures “How to display”.
5.4.3. Clearing self-diagnosis function
- After repairing, continue to press “STOP” button for at least 5
seconds. And then “CLEAR” is displayed on the LCD about 2
seconds. / (Clearing the contents of self-diagnosis function)
- Always be sure to clear memories after completing repair.
Table 5-1
Display code Symptom Cause
H15 When the disc tray opens, it closes
by itself. Disc tray open/close detect switch
(S1001) fault. / (Check and replace)
H16 When the disc tray closes, it opens
by itself.
5.5. Last error code saved during NO PLAY