6
To start play
To stop play
To turn off
the unit
Skipping
tracks
Searching
through tracks
To adjust the
volume
The remote control can be operated regardless of the
HOLD mode of the unit.
Preparation:
Release the remote control from the HOLD mode.
∫
Operation confirmation tones
»
When an operation button is pressed, a confirmation
tone sounds. Refer to the parentheses in the illustra-
tions for the different types of confirmation tones.
Note
!
You cannot change sound quality or volume if you have
connected a cable to the [OPT OUT/OUT] jack. An error
tone (beep-beep-beep-beep) sounds when you press
[EQ] or [
j
,VOL,
i
].
Basic operation
Press once during off or stop mode.
Press once during play.
Press and hold during play or stop
mode.
HOLD
(Beep)
(Beep...Beep)
(Beep...Bee...p)
Using the Wired Remote Control
Skip play
The disc plays from the selected track through to the
last track, then play stops automatically.
Preparation:
Put unit in stop mode.
1
Select the desired track.
2
Press during play.
(Press [
:
] twice to skip to the beginning of
the previous track.)
Press and hold during play.
VOL
Forward
(Beep Beep)
Backward
(Beep Beep Beep)
≥
The volume range is 0–25. (Press
and hold to change the volume suc-
cessively.)
≥
A tone (beep-beep) sounds when
you reach the minimum or maximum
volume.
Decrease
(Beep)
Increase
(Beep)
Changing the sound quality
This function is only for remote control.
Press during play or stop mode.
The setting switches in the sequence indicated below
each time [EQ] is pressed.
S-XBS
>
TRAIN
>
LIVE
>
Cancel (no indicator is shown)
^ -------------------------------------------------------------}
S-XBS:
Select this setting to boost the low-range response.
TRAIN:
Select this setting to avoid annoying other passengers
with noise from your stereo earphones while riding on
the train, or to reduce fatigue when listening for a long
period of time.
LIVE:
Select this setting for a live concert effect.
Note
!
This function does not work if you have connected a
cable to the [OPT OUT/OUT] jack.
≥
The setting is canceled when you connect a cable to
the terminal, but is restored when you disconnect the
cable.
≥
The setting cannot be changed while a cable is con-
nected. An error tone (beep-beep-beep-beep) sounds
when you press [EQ].
EQ
Forward
(Beep Beep)
Backward
(Beep Beep Beep)
(Beep)
(Beep)
