M
FM
1
07 10
1
FM
07 10
1
≥
Press and hold to scan the stations rapidly.
≥
“TUNED” appears when tuned.
≥
When “M” is displayed, press [TUNING
MODE] to cancel it.
Store the frequencies of up to 30 stations; 20 FM and 10 AM.
1
Slide [HOLD
1
] in the opposite direction to the arrow to cancel.
2
Press [RADIO/BAND] to turn the tuner on and change the band.
3
Press [TUNING MODE] to display “M”.
4
Press [RECALL, MEMORY].
5
Do each of the following within 10 seconds.
1
Press [
:
,
s
] or [
9
,
r
] to select the frequency.
1
≥
Press and hold to scan the stations rapidly.
2
Press [RECALL, MEMORY].
3
Press [
:
,
s
] or [
9
,
r
] to select the memory number.
1
≥
Press and hold to change incrementally.
4
Press [RECALL, MEMORY] to confirm the setting.
Change the frequency step according to the area.
1 Press [RADIO/BAND] to switch on the power.
2 Press and hold [RADIO/BAND] until the step appears.
3 Do each of the following within 10 seconds.
1
Press [
:
,
s
] or [
9
,
r
] to select the step.
1
Each time you press [
:
,
j
] or [
9
,
i
]
2
Press and hold [RECALL, MEMORY] until the frequency appears to
confirm the step.
∫
To return to the previous frequency step
Repeat the above procedure.
≥
Changing the step erases the stations you stored in memory.
S-XBS
S-XBS
r
6
RQT8256
Button control guide (Listening to the Radio)
Set to “MONO” when there is noise during FM
reception.
Sound becomes monaural, but noise is reduced.
Each time you press [MONO/ST,
FM MODE]
No display
(stereo)
MONO
U0.2
U0.1
E
FM 0.2 MHz,
AM 10 kHz
(original setting)
FM 0.1 MHz,
AM 10 kHz
FM 0.05 MHz,
AM 9 kHz
FM
U0 2
When using overseas
M
FM
1
98 00
M
FM
1
06 00
1
M
FM
1
07 10
1
Set to “CITY” if reception is poor or if there
is interference from another station.
Each time you press and hold
[
%
CITY/NOR]
CITY
Radio on/
Change
band
RADIO/BAND
Press.
Select the
station
9
,
i
(
Forward)
:
,
j
(Backward)
Press.
No display
(canceled)
To obtain good reception
AM
Try various directions to obtain
optimum reception.
FM
The headphone cord is also the FM antenna, so extend it instead
of leaving it coiled.
Receive
an FM
broadcast
clearly
%
CITY/NOR
Select
stereo or
monaural
FM
MONO/ST,
FM MODE
Boosts the
bass
No display
(canceled)
Enhanced
S-XBS
Sound
quality
EQ
Each time you press [EQ]
∫
, OPR OFF
Turn off
Storing stations in memory
Listening to a memorized station
Erasing a memorized station
1
Perform steps 1 to 3 for “Storing stations in memory” (
➪
above).
2
Press [
:
,
s
] or [
9
,
r
] to select the memorized station.
≥
Press and hold to change incrementally.
≥
“TUNED” appears when tuned.
3
Adjust the volume.
1
Perform steps 1 to 3 for “Storing stations in memory” (
➪
left).
2
Press [
:
,
s
] or [
9
,
r
] to select the memorized station to
be erased.
≥
Press and hold to change incrementally.
3
Press [RECALL, MEMORY].
The frequency number flashes.
4
Do each of the following within 10 seconds.
1
Press and hold [RECALL, MEMORY] until “- - - -” flashes.
2
Press [RECALL, MEMORY].
M
FM
1
- - - -
i
, VOL
(Increase)
j
, VOL
(Decrease)
Volume
control
(0 to 25)
Press.
HOLD
(Function lock)
HOLD
1
Slide in direction of arrow.
(Slide in opposite direction to cancel.)
Press.
≥
Press again to change the band.
Each time you press the button:
FM
()
AM
≥
The effect may differ with different kinds of
music.
rqt8
256
-p.qxd3.3 05.5.10 7:00 PM ページ 6
