Panasonic SH-ALL1CGN, Owner'S Manual

Page: 13 / 34

- 13 -
≥ The following steps are based on a smartphone.
≥
Do not connect a LAN cable. Doing so will disable the Wi-Fi
®
function.
1
Turn this unit on.
2
Go to Wi-Fi
®
settings on the device.
≥
Proceed to the next step after the network indicator changes from blinking in
blue and red to blinking in blue.
– The blinking in blue starts after maximum of approximately 60 seconds. If
the blinking in blue does not start, restore the factory defaults. (
l
27)
≥
Make sure that DHCP is enabled for the network settings on the device.
3
Select “AllPlay XXXXXX_AJ” to connect to this unit.
≥
“X” stands for a digit that is unique to each set.
Using an Internet browser
Settings Wi-Fi settings
Wi-Fi