Panasonic SG-P Series, Instruction Manual

Page: 33 / 76

3.2.2 When using the Visible Type
In an application where the switch indicator is hidden by a movable door frame, etc., use a
Visible type and install it as shown in the following diagram.
● Do not install the switch body of this device on a movable door.
● Do not use the compact type actuator for detection
● With the low-code type of this device, the switch body detects another
SG-P Series
actuator. Do not carelessly disable the switch body and pay careful attention to the
management of the actuators.
● Mount the switch body carefully so that it does not come in contact with the movable
door.
● Mount the switch body in a location where it cannot be reached or it is hidden so that it
cannot be easily disabled. Or, mount the switch body using M4 screws that require
special tools or mount it in such a way that it cannot be removed with ordinary tools.
● For detailed information about minimizing the probability that it might be disabled, refer to
relevant precautions described in ISO14119.
3.2 Mounting Methods
WUME-SGPUM-2 3-7