© Panasonic Industrial Devices SUNX Co., Ltd. 2021
- 12 -
3. Mount the brackets so that the protrusion of the A part and the B part are overlapped.
B part to be attached to the top or bottom side of this device differs depending on the
direction of mounting described as the following chart.
4. Mount the mounting bracket on to the mounting surface with two hexagon-socket head
bolts [M5 (please arrange separately)] temporarily.
5. Adjust the height of the emitter and the receiver to level with the elongate holes and then
tighten the hexagon-socket head bolts.
Note: For the models that the intermediate supporting bracket (
MS-SF2B-2
) is enclosed with, be sure to use
the intermediate supporting bracket (
MS-SF2B-2
). For details, refer to
<When the intermediate
mounting bracket (MS-SF2B-2) (accessory) is used>.
