8. To Supply Power Source and Signal Check
To operate this unit SE-HD560 normally, it is necessary to connect to the unit ST-HD560. When
operating the unit SE-HD560, be sure to connect to the unit ST-HD560 by connection cable.
1. Connect with the Tuner (ST-HD560). Refer to
Fig. 8-1.
2. Connect the AC power supply cord to the Amplifier / (SE-HD560).
Refer to
Fig. 8-1.
3. Connect the speakers to speaker terminal. / Refer to
Fig. 8-1.
4. Turn on the power of the Amplifier (SE-HD560).
5. Set INPUT SELECTER to select the external source (EXT) of the
Amplifier (SE-HD560).
6. Input a sound signal to external input terminal of the Tuner (ST-
HD560), and confirm to be outputted from the speaker. (Both High
and Low.)
Fig. 8-1.
11
