Panasonic SDR-SW20PL, Service Manual, Page: 17 / 58

17
8.3. Disassembly Procedure
No. Item Fig Removal
1 Front case unit Fig. D1 2 Screws (A)
Front case unit
2 Tripod piece Fig. D2 2 Screws (B)
Access panel light
Tripod O ring
Panel light O ring
Tripod piece
3 Rear cover Fig. D3 2 Screws (C)
Rear cover
4 R cover Fig. D4 2 Screws (D)
5 Locking tabs
Fig. D5 R cover
5 Lens piece,
Lens protection glass
Lens damper Fig. D6 3 Screws (E)
Lens piece
Lens protection glass
Lens damper
6 Side case (L) unit Fig. D7 6 Screws (F)
Case O ring
FP4802(Flex)
1 Screw (G)
Battery cover
Side case (L) unit
Fig. D8 Attention when installing
the Case O ring
Fig. D9 NOTE: (When Installing)
7 Lens unit/Main P.C.B. Fig. D10 4 Screws (H)
FP6961(Flex)
P6901(Connector)
Fig. D11 FP6903(Flex)
Lens unit/Main P.C.B.
8 Radiation plate Fig. D12 4 Screws (I)
Radiation plate
9 Battery catcher unit Fig. D13 2 Screws (J)
FP6905(Flex)
Battery catcher unit
10 Main P.C.B.,
Jack P.C.B. Fig. D14 1 Screw (K)
FP6931(Flex)
FP6971(Flex)
FP6905(Flex)
2 Locking tabs
Fig. D15 FP6001(Connector)
Main P.C.B.
Jack P.C.B.
11 Lens unit Fig. D16 FP6931(Flex)
FP6971(Flex)
1 Screw (L)
1 Locking tab
Lens unit
12 Battery case Fig. D17 1 Screw (M)
2 Locking tabs
Battery case
13 Front P.C.B. Fig. D18 1 Screw (N)
2 Ribs
FP4801(Flex)
Front P.C.B.
14 LCD unit Fig. D19 R base rubber
4 Screw (N)
Fig. D20 GND O ring
LCD unit
15 LCD hinge unit,
Monitor P.C.B. Fig. D21 4 Screws (P)
Packing angle
4 screw O rings
2 Screws (Q)
Fig. D22 2 Locking tabs
LCD case top
FP8101(Flex)
3 Locking tabs
FP8102(Flex)
LCD hinge unit
Monitor P.C.B.
16 LCD panel Fig. D23 Reflection sheet
Lighting plate
Diffusion sheet
Prism sheet B
Prism sheet A
Light guide holder
LCD panel
LCD shield case
LCD case bottom unit
Fig. D24 Attention when installing
the LCD O ring
17 Speaker unit,
Operation FPC unit Fig. D25 9 Screws (R)
Operation angle
Earth angle
Speaker unit
Fig. D26 SS operation angle
Zoom operation angle
SS button rubber unit
Zoom OP rubber unit
Operation FPC unit
Fig. D27 NOTE: (When Installing)
18 CCD unit,
Optical filter Fig. D28 2 Screws (S)
CCD cushion rubber
CCD unit
Optical filter
19 IRIS unit Fig. D29 Solder (8 points)
3 Screws (T)
1 Rib
IRIS unit
Fig. D30 NOTE: (When Installing)
20 Zoom motor unit Fig. D31 2 Screws (U)
Zoom motor unit
21 Focus motor unit Fig. D32 2 Screws (V)
Focus motor unit
22 Master flange,
4th moving frame unit,
3rd moving frame unit Fig. D33 3 Screws (W)
Master flange
4th moving frame unit
3rd moving frame unit
23 Guide pole S,
Guide pole,
2nd moving frame unit Fig. D34 Guide pole S
Guide pole
2nd moving frame unit
No. Item Fig Removal