22
VQT2L28
Caution:
Check that the access lamp has gone off.
1
Open the LCD monitor.
2
Open the SD card cover and insert (remove) the SD card into (from)
the card slot.
≥
Face the label side
B
in the direction shown in the illustration and press it straight in as far
as it will go.
≥
Press the centre of the SD card and then pull it straight out.
3
Securely close the SD card cover.
≥
Do not touch the terminals on the back of the SD card.
≥
See page 112 for details on handling the SD card.
Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used on other equipment,
for the first time on this unit, format the SD card. (
l
76) When the SD card is formatted, all
of the recorded data is deleted. Once the data is deleted, it cannot be restored.
Access lamp [ACCESS]
A
≥
When this unit is accessing the SD card or built-in memory, the access lamp lights up.
SDRS50&T50&H85EB-VQT2L28_mst.book 22 ページ ２００９年１２月２５日 金曜日 午後１２時１８分
