Panasonic SDR-H100K, Owner'S Manual

Page: 40 / 132

40
VQT3E42
This unit will resume recording pause mode
about 0.8 seconds after the LCD monitor is
reopened.
¬
Change the mode to .
1
Select the menu. (
l
27)
2
Close the LCD monitor while
the mode is set to
.
The status indicator
A
flashes green and the
unit goes into Quick start standby mode.
3
Open the LCD monitor.
The status indicator
A
lights red and the unit
is put into recording pause.
≥
When in Quick start standby mode
about 70% of the power used in
Recording pause mode is being
consumed, so the recording time will
be reduced.
≥
Quick start standby mode is canceled if
j
about 5 minutes have elapsed
j
mode is set to
≥
It may take some time for Automatic white
balance to adjust.
≥
In the Quick start mode, the zoom
magnification becomes 1
k
.
≥
If [ECONOMY] (
l
29) is set to
[5 MINUTES] and the unit automatically
goes into Quick start standby mode, close
the LCD monitor and then open it again.
≥
Turn the unit off using the power button.
When the power is turned on with the mode
set to
, the unit will enter the recording
pause mode after about 1.9 seconds.
Select the menu. (
l
27)
≥
In the Quick power on mode, the zoom
magnification becomes 1
k
.
Quick start
[SETUP]
#
[QUICK START]
#
[ON]

Quick power on
[SETUP]
#
[QUICK POWER ON]
#
[ON]
SDR-H100&S71&S70&T70-VQT3E42_eng.book 40 ページ ２０１０年１１月２９日 月曜日 午後６時２１分