Note
•
When the “DDNS” setting is changed, the “DDNS” setting on the [Advanced] tab of the “Network” page
also changes to the same setting.
[Recommended network setting for internet]
The recommended settings for connecting to the Internet are performed here.
By clicking the [Set] button, a dialog displaying how the following settings will change is displayed.
Click the [OK] button after checking the settings to change the settings to the displayed values.
–
[JPEG/H.264] tab on the “Image/Audio” page
[JPEG(1)]
[Image capture size]: 640x640/VGA/640x360
[JPEG(2)]
[Image capture size]: 320x320/QVGA/320x180
[H.264(1)]/[H.264(2)]
[Internet mode (over HTTP)]: On
[Transmission priority]: Best effort
[Max bit rate (per client)*]: Max. 1024 kbps, Min. 128 kbps
[H.264(1)]
[Image capture size]: 1280x1280/1280x960/1280x720
[Max bit rate (per client)*]: Max. 1024 kbps, Min. 256 kbps
[H.264(2)]
[Image capture size]: 640x640/VGA/640x360
[Max bit rate (per client)*]: Max. 1024 kbps, Min. 128 kbps
–
[Network] tab on the “Network” page
[Common]
[Max RTP packet size]: Limited(1280byte)
[HTTP max segment size(MSS)]: Limited(1280byte)
Note
•
When “8M F Double Panorama”, “4M F Double Panorama”, “8M F
Panorama”, “4M F Panorama”, “8M F Quad PTZ”, or “4M F Quad PTZ” is
selected for “Image capture mode”, the image capture size configured for “JPEG(2)” or “H.264(2)” will
become “VGA” or “640x360”.
Operating Instructions
69
10 Configure the basic settings of the camera [Basic]